Skip to content
Psi to Psia logo Psi to Psia
Percentages

Percentage Increase and Decrease, Explained

Price went from $40 to $50: what's the percentage change? The formula, why rises and falls aren't symmetric, compound changes and reversing a change.

By Psi to Psia Team
Percentage Increase and Decrease, Explained

Percentage change tells you how much something grew or shrank relative to where it started. The base is always the starting value.

The formula

Change % = (new − old) ÷ old × 100

From $40 to $50: (50 − 40) ÷ 40 × 100 = 25% increase.

A negative answer is a decrease. From $50 to $40: (40 − 50) ÷ 50 × 100 = −20%, a 20% decrease.

Why up and down are not symmetric

The same $10 gap is a 25% increase going up but only a 20% decrease going down, because the base changes from $40 to $50. That is why a 50% increase followed by a 50% decrease does not bring you back to the start: 100 → 150 → 75.

Chain several changes

Turn each change into a multiplier and multiply them together:

  • A 10% increase is × 1.10.
  • A 20% decrease is × 0.80.
  • A 10% rise then a 20% fall is 1.10 × 0.80 = 0.88, a 12% overall decrease.

The same rule handles growth over time. A value that grows 10% a year for 3 years is multiplied by 1.10 × 1.10 × 1.10 = 1.331, a 33.1% total increase — not 30%.

Reverse a percentage change

To find the original value before a change, divide by the multiplier instead of subtracting the percentage:

original = new ÷ (1 + change)

A price that rose 25% to $50 started at $50 ÷ 1.25 = $40. Subtracting 25% of $50 gives $37.50, which is wrong because the 25% was measured on the old price.

Percent vs percentage points

When a rate itself changes, say which kind of change you mean. An interest rate rising from 4% to 5% went up 1 percentage point, which is a 25% increase in the rate.

Quick checks

  • Multiply the old value by the multiplier and confirm you get the new value: $40 × 1.25 = $50.
  • Increases above 100% are possible: going from 10 to 35 is a 250% increase.
  • For prices and other amounts that cannot fall below zero, a decrease can never be more than 100%.

For turning results into fractions or ratios, try the Common Fractions to Decimals and Decimal to Ratio converters.